top of page

MEASURING INSTRUMENTS

Elapsed Time Meter (Hours Run Meter)

 

ETM72 & ETM96 Elapsed Time Meters (Hours Run Meters) are used to monitor ON/RUN time of plant/equipment which allows the user to check functions such as Production Efficiency, Cost and service period monitoring.

DIN rail Moving Iron meter (EQ,PQ,VQ,ZQ 35)

 

EQ35, PQ35, VQ35 & ZQ35 meters measure AC/DC Voltage or Current and frequency. These meters are installed on 35mm Din rail, the mounting width is 45mm and it is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

Challenger series meters

 

Challenger 361, 362, 363 & 364 meters measure AC/DC Voltage or Current and frequency. The design features detachable lower fascia which allows the flexibility of either surface or window mounting. These meters have a rear zero adjuster screw for tamperproof installation.

Saxon series meters

 

Saxon 012 & 013 meters measure AC/DC Voltage or Current and frequency. The design features detachable lower fascia which allows the flexibility of either surface or window mounting. These meters can withstand high levels of shock, vibration, dirt & humidity.

Rish Vista

 

The RISH VISTA range of analog panel meters offers accurate measurement and indication of most electrical and electronic parameters in industry as per industrial standard case size.

Synchroscope (SQ)

 

SQ96 Synchroscope indicates the phase & frequency difference between two AC alternators which are to be paralleled with the help of rotating LEDs. The meter is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

Vibrating Reed frequency meter (FQ)

 

FQ72 & FQ96 frequency meters measure frequency in the range of 45 to 65Hz with the help of thin steel strips called reeds placed in a row on a steel plate. The meter is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

Moving Iron selector switch meter (SWT)

 

EQ SWT 72 & EQ SWT 96 moving iron selector switch meters measure rms values of AC Voltage or AC Current of 1 phase as well as 3 phase 3 wire & 4 wire systems. It is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

Dual Frequency meters (ZQ 2 in 1)

 

ZQ96 2in1 meters measure two different ranges of frequencies in the range of 45 to 450Hz. For maximum accuracy, the essential measuring range is obtained by suppressing unwanted frequency span. The meter is housed in UL94V-0 approved polycarbonate case and can be mounted in Mosaic mounting.

Maximum Demand Ammeters (BIQ & BIEQ)

 

BIQ 48/72/96 meters measure maximum demand current and BIEQ 72/96 meters measure instantaneous & maximum demand current. These meters are having unique feature of Scale Interchangeability, housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

Power Factor meter 240deg (CL)

 

CL96 & CL144 Power factor meters measure PF (cosine of the angle Ø between Voltage & Current vectors) with a better resolution. It is calibrated in values of cosØ in values of Ø. Housed in UL94V-0 approved polycarbonate case it can be mounted in Mosaic.

Moving Coil meter DC ammeters and voltmeters 240deg(PL)

 

PL48, PL72, PL96 and PL144 Moving Coil meters measure average DC Voltage or DC Current with a better resolution. These meters are having unique feature of Scale Interchangeability, housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

Power meter 90deg (WQ)

 

WQ96 & WQ144 Power meters measure active & reactive power. The meter is suitable to indicate forward (export/outgoing) and reverse (import/incoming) power flow. The meter is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

Power Factor meter 90deg (CQ)

 

CQ72, CQ96 & CQ144 Power factor meters measure Power factor (cosine of the angle Ø between Voltage & Current vectors). The meter is calibrated in values of cosØ in values of Ø. It is housed in UL94V-0 approved polycarbonate case and can be mounted in Mosaic mounting.

Moving Iron meter AC ammeters and voltmeters 90deg (EQ)

 

EQ48, EQ72, EQ96 and EQ144 Moving Iron meters measure true rms AC Voltage or AC Current. These meters are having unique feature of Scale Interchangeability, housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

Digital Current Monitoring Relay

 

RISH Relay I is used to protect against Over Current, Under Current, Current Loss, Current Un balance.

Speed Sensing Trip Relay
 

The Speed Sensing Relay provides three user adjustable trip levels with LED relay state indicator and a speed indicator output signal.

Hot- Spot 3 Relay

 

The Temperature trip relay has been designed to monitor three separate temperature zones in large electric motors, transformer winding or any temperature conscious equipment such as process lines gas turbines or engine driven generating sets, using Resistance Temperature Detectors (RTDs).

Earth Fault Relay

 

The relay is provided with settable EFR, current trip settings & settable trip time delay. Relay energises on fault condition. External CTs to be installed along with EFR, of secondary rating of 5 A or 1 A, can be selected via terminal 1 & 2 or 1 & 3 respectively.

Motor-Protection Relay

 

The Motor protector relay is designed to monitor the correct phase rotation or sequence of 3 phase system R, Y, B. Rotating machines are particularly vulnerable to incorrect phase sequence.

Transducer Trip Relay

 

The Transducer trip will accept analogue signal from most measuring transducer and transmitters, in the form of DC voltage or currents. Inputs are monitored within the preset limits and in the event of the input moving outside these limits. 

Phase Sequence & Phase Failure Relay

 

The Protector is designed to monitor the correct phase rotation or sequence of 3 phase system L1, L2, L3. Rotating machines are particularly vulnerable to incorrect phase sequence.

Combined Under / Over Voltage & Frequency Relay

 

The combined voltage & frequency Protectors give continuous surveillance of the monitored circuit. The product offers user adjustable trip point ( set point ) for voltage and frequency, plus adjustable time delay setting. 

Frequency Relay

 

The frequency protectors provide continuous surveillance of the monitored circuit. When the frequency moves outside the set point limit, the relay will operate giving an alarm, control or tripping single. An illuminated LED indicates when the relay is energized.

RISH SUMMATION CT

 

RISH XMER Sigma Summation CTs are designed to summarize several synchronous Alternating Currents of equal phase relation. They are used to add secondary currents of several main CTs in order to measure with one CT only. That means the primary currents are added & divided by the number of inputs

3 Phase Current Transformer

 

Rish 3 Phase CTs are rectangular type and encapsulated with UL94V-0 approved polycarbonate. Metering 3 phase CTs feature with wire sealable terminal covers & wide range of primary current ratings.  

RISH TW Series Round CTs

 

Rish TW series round CTs are round in shape & encapsulated with UL94V-0 approved polycarbonate. These CTs have terminals for secondary connections & feature wide range of primary current ratings, Bus bar sizes, case widths. They are having wall, cable & bus bar mounting options

RISH TW-E Series Round CTs

 

RishTW-E series round CTs are cost effective, round in shape & encapsulated with UL94V-0 approved polycarbonate. These CTs have wires with lugs for sec. connections & feature wide range of system current ratings, Busbar sizes,case widths.They have wall, cable & bus bar mounting options

RISH Protection class CTs

 

Rish Protection class CTs are square & round type encapsulated with UL94V-0 approved polycarbonate.These CTs used for protection purpose (acc class 5P10, 10P10 etc)& features wide range of primary current ratings, Busbar sizes,case widths,having wall, cable, bus bar & DIN rail mountings

RISH Xmer Split Core CT's

 

Rish Split core CTs are square type and encapsulated with UL94V-0 approved polycarbonate having an openable jaw which enables an operation free installation/removal. Wide range of system current ratings, Busbar sizes, case widths & having wall, cable & bus bar mountings

Rish Shunts

 

Rish Shunts provide DC millivolt signal proportional to higher DC current to drive ammeter indicators, overload protection and control devices. These are made from Manganin material. Available from 1A to 3000A with an accuracy 0.5 & 1%. Standard voltage drop is 50, 60, 75 &150mV.

RISH CAM Switches

 

The Wide range of Rish Rotary CAM switches cover most application with different contact design, contact material and terminals allow their use as control switches, instrumentation switches , motor control switches and Electronic circuitory.

RISH DPM Hz

 

RISH DPM Hz is specially designed to measure important electrical parameters like Frequency and RPM.

3 1/2 digit AC 3Phase Ammeter/Volt Meter (96x96)

 

31/2  digit Digital Panel Meter measures AC Current / Voltage in a three phase network, available in 96x96 size. Suitable for wide range of measuring applications where precise onsite adjustment of the display range is required.

3 1/2 digit AC Ammeter/Volt Meter (48x96/96x96)

 

31/2  digit Digital Panel Meter measures AC Current / Voltage in a single phase network, available in 48x96 / 96x96 size. Suitable for wide range of measuring applications where precise onsite adjustment of the display range is required.

4 digit fully programmable AC Ammeter/Voltmeter (48x96/96x96)

 

TRMS 4 digit fully programmable Digital Panel Meter, measures AC Current / Voltage in a single / three phase network, available in 48x96 / 96x96 size. Universal features like I/P: V-100 to 500VLL programmable, I-1/5A selectable, Aux: 40 to 300V AC/DC, click fit arrangement

NA6 (Bargraph)

 

NA6 is a Vertical type Bar graphs with 2 independent channels in 3 or 7 colour with programmable switch over. Recording of 750 measuring segments. Universally programmable input. Up to 8 programmable alarm outputs. Communicates over RS485 and has analog and relay output. Size 48x144x100 mm.

Rish EINE

 

4 digit Digital Panel Meter Rish Eine DPM Measures important electrical parameters in 3 Phase 4 Wire , 3 Phase 3 Wire & single phase network & replaces the multiple analog panel meters. PT / CT primary onsite programmable.

NA5 (Bargraph)

 

NA5 is a single channel 3 or 7 colour bargraph with programmable switch over. Recording of 750 measuring segments, released temporary. Universally programmable input. Up to 8 programmable alarm outputs. Communicates over RS485 and has analog and relay output. Size 48x144x100 mm.

NA3 (Bargraph)

 

NA3 are Horizontal type bar graphs with universal input available in 3 or 7 colours. Linear characteristics. Programmable as one colour/ interval/ sector/ point or trend type bar graph. Conforms to European Norms and is CE approved. Very sleek size: 96x24x125 mm.

N30 Series

 

N30 (H, O, P, U) programmable meters. These have 5 Digit ultra bright LED display and is site programmable through keys or LP Config software. Safety and compatibility compliance is according to European Norms & is CE approved. Available in 48 x 96 mm size.

N25 Series

 

N25 Series are 5-Digit digital meter with ultra bright LED display ( Multi-colours). AC/DC inputs. Parameter programmable through LPConfig software with on-site programmable feature. Conforms to European Norms & CE approved. Size 48 x 96 mm.

4 1/2 digit R Series AC Volt Meter

 

4 1/2 Digit LCD digital panel meters RISH R412 have been designed for industrial applications, which frequently require precise and on-site adjustment of the display range.

4 1/2 digit 1" display DC Ammeter/Volt Meter (72x144)

 

Digital Panel Meter in 72x144size with 41/2  digit 1 inch display Digital AC Ammeter / Voltmeter, suitable for wide range of measuring applications where precise onsite adjustment of the display range is frequently required. Wide range of inputs available

4 1/2 digit DC Ammeter/Volt Meter (48x96/96x96)

 

41/2  digit Digital DC Ammeter / Voltmeter available in 48x96 / 96x96 size, suitable for wide range of measuring applications where precise onsite adjustment of the display range is frequently required. Wide range of inputs available suitable for almost any input requirement.

4 1/2 digit 1" display DC Ammeter/Volt Meter (72x144)

 

Digital Panel Meter in 72x144size with 41/2  digit 1 inch display Digital AC Ammeter / Voltmeter, suitable for wide range of measuring applications where precise onsite adjustment of the display range is frequently required. Wide range of inputs available

3 1/2 digit DC Ammeter/Volt Meter/ Temperature DPM (48x96)

 

Digital Panel Meter 48x96 size 31/2  digit DC Current / Voltage / Temperature, suitable for wide range of measuring applications where precise onsite adjustment of the display range is required. Wide range of inputs available suitable for almost any input requirement.

3 1/2 digit DC Ammeter/Volt Meter (24x96)

 

Sleekest Digital Panel Meter 24x96 size 31/2  digit DC Ammeter / Voltmeter, suitable for wide range of measuring applications where precise onsite adjustment of the display range is required. Wide range of inputs available suitable for almost any input requirement.

3 1/2 digit DC Ammeter/Volt Meter (24x48)

 

Smallest Digital Panel Meter 24x48 size 31/2  digit DC Ammeter / Voltmeter, suitable for wide range of measuring applications where precise onsite adjustment of the display range is required. Wide range of inputs available suitable for almost any input requirement.

3 1/2 digit Frequency DPM (48x96/96x96)
 

31/2  digit Digital Frequency Meter available in 48x96 & 96x96 size, most suitable for a wide range of frequency measurement.

4 1/2 digit 1" display AC Ammeter/Volt Meter (72x144)

 

Digital Panel Meter in 72x144size with 41/2  digit, 1inch display Digital AC Ammeter / Voltmeter, suitable for wide range of measuring applications where precise onsite adjustment of the display range is frequently required. Wide range of inputs available.

4 digit Power & Power Factor DPM (72x144)

 

4 digit Digital Panel Meter 72 X 144 series which measures kW / kVAr / kVA  or PF in a single or three phase system where  1Ph / 3 Ph 3Wire / 3Ph 4Wire is onsite selectable. PT / CT primary onsite programmable.

4 digit Power & Power Factor DPM (96x96)

 

4 digit Digital Panel Meter which measures Power or Power factor in a single or three phase system where  1Ph / 3 Ph 3Wire / 3Ph 4Wire is onsite selectable. PT / CT primary onsite programmable.

DC Energy Meter - Rish EM DC

​

RISH EM DC series is specially designed to measure, display and communicate DC Voltage, Current, Power and Energy to monitor and control the target system

RISH OPTIMA VAF

​

RISH VAF is specially designed to measure important electrical parameters like AC Voltage, AC Current, Frequency and other parameters

RS485 to RS232 Converter

​

RS485 to RS232 Converter converts RS485 signal to the RS232 signal, used for communication between the measuring instruments with RS485 o/p & PLC / SCADA / Energy Management System with RS232 input.

RS485 to USB converter

​

RS485 to USB Converter converts RS485 signal to the USB signal, used for communication between the measuring instruments with RS485 o/p & the computer system with USB input.

ND20

​

ND20 measure RMS values of Electrical parameters. LCD backlit 4 line display. Feasible tetra-quadrantic energy measurement. Additional pulse output configurable to any power parameter. Comply EU Norms & CE approved. Measure individual harmonics up to 21st & THD. Size: 96 x 96 mm. 

N10/N10A

​

N10/ N10A measures RMS values of electrical parameters.  It has 4-line display with 0.5 accuracy class. Parameters can be configured as per user requirement in 20 pages through the keys.Harmonics up to 25th, 3 alarm and 1 analog output. Size 144 x 144m. CE approved.

Rish Master 3430

​

Multifunction meter with TRMS measurement, measures distorted waveform up to 15thharmonic and 48 electrical parameters in a 3 phase network (V, I, F, In, kW, kVAr, kVA, Phase Angle, PF , %THD, KVAh, Imp & Exp kWh, kVArh) Optional MODBUS (RS485), Pulse & Analog o/p

Counter type Energy Meter - EM3490

 

96x96 size panel mounted Mechanical Counter type Energy Meter with pulse o/p. Most suitable for the secondary metering with CT primary programmable, available in class 1 & 0.5 accuracy

Integra 2000

​

Multifunction meter with LCD backlit display with a unique feature of user programmable screens. Excellent harmonic handling for true power measurements with 113 electrical parameters in a 3 Ph. Network. Optional RS485, RS232, pulse, analog o/p.

RISH EM 1320/30/40

 

RISH EM series is specially designed for Active, Reactive and Apparent Energy Measurement including per phase THD, Powers and others parameters as per different models.

RISH EM 2340DS

​

Dual Source Energy Meterfor Energy Monitoring : 

RISH EM 2340DS is a compact True RMS energy meter, specially designed for measurement of Active, Reactive and Apparent Energy including per phase THD, Power and others important electrical parameters.

Rish Delta Energy

​

Universal features like I/P 100-500VLL programmable, Aux 40-300V AC/DC, click fit arrangement, measures V, I, F, φ, PF, W, VA, VAr, Demand & Max Demand (I, VA, Imp & Exp W), RPM, run hr, on hr, Interrupt, Min/Max V & I, VAh, Imp & Exp Wh, VArh Optional RS485/Relay o/p

RISH Master 3480 - Touch Screen Graphics LCD

​

 

Multifunction Meter with Touch screen LCD TRMS measurement 3ph & 1ph network V, I, F, KW, KVAr, KVA, %THD, demand & max demand (I, kW, kVA,) run hr, on hr, interrupt, KVAh, Imp & Exp KWh, Optional modbus, relay & analog o/p

Multi Transducer - Rish CON M

 

The RISH CON - M transducer is used to measure and convert parameter of Three-phase 3W/4W AC Bal./Unbal. It ensures that the measurement and conversion of measured values into standard analog current signals. Relay / Pulse outputs.

RISH CON - CA/CV (Dual Output)

​

The transducer RISH CON - CA/CV is a dual output tranduser which converts a sinusoidal AC Current or AC Voltage into load independent DC Current or a load independent DC Voltage proportional to the measured value.

Flush Mounted Rish CON TPT(96x96)

 

The purpose of the Tap position transducer is to convert tap position of transformers to equivalent analogue output. Outputs can be given as input to either RTU or indicator or recording instrument.

Frequency Transducer - F11/ F12

 

F11/F12 convert Frequency in the range 45…65Hz or 360…440Hz of AC voltage (upto 480V) into proportional 1or2 analog output load dependent Vdc or independent Idc. AC/DC Aux with Accuracy of F11 ±0.5% & F12 ±0.2%.Open & short-circuit protection

P18

 

P18-Temperature & Humidity Transducer & P18L-Temperature or Humidity transducer. Calculation of selected physical quantities (dew-point temperature, absolute humidity-only P18). 2 analog outputs 0/4…20 mA or 0…10 V - P18 option. Storage of maximum and minimum values (only P18).

Phase Angle Transducer (PF) - C11

 

C11 measures the phase angle between range of I(10A) or V(660V) of 1Ø or 3Ø balanced network having a sine wave into proportional 1 or 2 analog output load dependent Vdc or independent Idc. Based on Zero crossing measuring principle, AC/DC Universal Aux

Current/Voltage Transducer - Ixx/Vxx Series (TRMS/AVG)

 

Rishducer Ixx /Vxx  series Tranducer is used to convert sine-wave or distorted AC current or voltage into proportional 1 or 2 analog output load dependent Vdc or independent Idc. Self powered or Aux supply with Accuracy ±0.5% or ± 0.2%. TRMS or Avg type measurement

Programable Multifuntion Transducer - M00 (LONbus communication)

 

M00 is programmable with LONWORKS interface, enable users to determine and supervises several parameter of electric power system programmed using LONTALK file transfer protocol. The measured variables transferred by means of standard network variable types (SNVT). Universal aux

Power Transducer Rish Con P

​

Rishcon-P converts active, reactive & apparent power of 1Ø /3Ø balanced or unbalanced loads into proportional 1or2 analog output load dependent Vdc or independent Idc. Universal Aux with accuracy ±0.2%,TRMS type Onsite input/output configurable,7 Seg LCD display, RS485

Current / Voltage Transducer Rish CON CA / CON CV (TRMS)

 

Rishcon-CA/CV measures and convert AC I or V input signal to proportional analog output load dependent Idc or independent Vdc. Wide Auxiliary power supply Aux with accuracy ±0.2% & TRMS measurement.Narrow housing, 22.5 mm.

Current/Voltage Transducer - Con I/Con V

 

Rishcon-V/I measures and convert AC V or I of RMS input signal to proportional 1or2 analog output load dependent Vdc or independent Idc. Universal Aux with accuracy ±0.2% & TRMS measurement. Onsite input output configurable, 7Segment LCD Display, RS485 communication.

RISH PI-102

 

The purpose of the RISH PI-102 is to electrically isolate input, outputs and power supply. The isolator fulills all requirements and regulation concerning electromagnetic compatibility EMC and safety (IEC61326-1 and IEC 61010-1:2010).

P20H

 

Destined for continuous conversion of high I/ V signals to standard D.C I/ V output signal. Small dimensions. 0.2 accuracy class. Fully prog. parameters: measurement avg. time, Conversion characteristic, preservation of the output signal at over. flows, RS-485 transmission parameters

P17G

​

A current loop separators. These are very thin (6.2mm) hence acquire less space and fit easily in the cabinet. P17 intakes input from temperature sensor/ DC voltage/ resistance and P17G input is DC current. Galvanic isolation between input and output in P17G.

Rish CON TPT (96 X 96)

 

Programmable input tap resistance(2/3/4 wire measurement) upto 25kOHM is converted to proportional 1 or 2 analog o/p signal either Idc or Vdc, Universal AC/DC aux With LED Display.

Isolating Amplifier Rish ducer TV808

​

DC isolating amplifier to electrically insulate i/p & o/p signals at2.3KV &power supply at3.7KV or amplify the signal levels in 252 i/p [0..1000V, ±20mA, ±20V] o/p [±20mA, ±10V] combinations selected by soldered jumpers, RLoad Max600 OHM  Accuracy±0.2%

ND-1

​

Measures power quality parameters accor. to EN50160 standard. Color 5.7" touch screen UI. Measure power and energy in four quadrants & harmonics up to 51st incl dips, swells, flicker, Universally progr. Webserver, FTP, Ethernet, RS485, Complies with EU Norms &CE approved.

RISH CON SI-102 (Dual output DC isolator )

​

Rish CON SI-102 Two electrically isolated analog outputs prevent interference voltage and current. Solves grounding problem in meshed signal networks.The device has one input and provides two independent outputs in an extremely small space.

Power Quality Monitor

​

RISH PQM is a compact, multi-function panel mount power quality monitor, which measures, calculates and displays major electrical parameters of three phase power system

Programmable Tap position transducer Rish CON TPT

 

Programmable input tap resistance(2/3/4 wire measurement) upto 25kOHM is converted to proportional 1 or 2 analog o/p signal either Idc or Vdc, Universal AC/DC aux With LED Display.

RISH MR220 Decoupling Module

 

Decoupling Diode to produce redundant applications or to decouple power sources from each other as well as from the load,10 – 60 Vdc,0 – 25 A max, DIN Rail Mountable, Extremely small size.

Rish Flex 2440B (3 Phase)

​

3Phase, 400-480Vac I/P& 24Vdc 40A O/p, Adjustable o/p voltage range 22-26Vdc. High efficiency ≥86% &  size (w-h-d) 250x150x160 mm, DIN rail mounting

Digital Panel Recorder N30B

 

N30B is 3 colour LED disp. digital meter. Records & reads data from devices with RS485 & MODBUS. 21 point individual characteristics. Internal Memory-350064 records. PC data archiving in MYSQL DB. RTC with day light saving time (DST) automatic adjustment. Size: 48 x 96 mm.

Paperless Recorder KD8

 

LCD Touch Screen with user interface panel. Comes with 3/ 6 programmable input channels. Have 6/ 12 alarm outputs and 4/ 8 digital outputs. Visualization of measurements in graphical forms. Compatible with MS windows CE operating System. CE Approved and safety as per European Norms.

Paperless Recorder KD7

 

LCD Touch Screen with user interface panel. Comes with 3/ 6/ 9/ 12 programmable input channels. Have 6/ 32 alarm outputs, 8/ 16 digital outputs and 4 or 8 analog outputs. Visualization of measurements in graphical forms. Compatible with MS windows CE operating System. Diversified user rights.

Rish Flex 6012A (1 Phase)

​

1Phase, 115-230Vac I/P& 12Vdc 36W - 72W O/p, Adjustable o/p voltage range 10 – 15.5 Vdc. High efficiency ≥88% & compact size (w-h-d) 50x120x50 mm & DIN Rail Mountable

RE57

 

RE57 is a compact temperature controller with universal input selection range with RTD, thermocouples and standard signals. It is equipped with relay and SSR driving outputs  which can fulfill most of the common requirements of industries.

RE19

​

Universally programmable smart PID logic temperature controlling with auto-tuning & soft-start function. Bump less transfer between auto & manual mode. CE Approved. Size: - 96 x 96 mm. Has LCD display for set point program viewing. 4 Binary/ Relay outputs or 2 analog outputs

RE 60

​

The RE 60 controller is a simple on- off controller which works by switchning ON & Off the electrical device for controlling temperature. It is destined for the temperature control in telecommunication cabinets in food and drying industries and everywhere.

RE55

​

RE55 is destined for simple applications. Conforms safety according to EN – 61000-6. Size: 96 x 96 mm. Control output (Relay or Transistor) & has auto tuning and PID algorithm and ON/OFF logic. Accessible with PT100 and Thermocouple J, K & S Type. Output available is SSR or Binary

PD22

​

PD22 is a data logger device which can archive emergency events. Archiving of process data and stores 390,000 Records. Archiving of emergency events (44400 events). Data exchange consisting in transmission of demands from the master system to the specific device

RE82

 

RE82 has two set points configurable. Universally programmable input, two outputs and one output (optional). 2 x 4 Digit LED Display & 2 x 21 points colour Bar graphs. Automatic valve steering logic. Programmable in 4 PID sets with 15 step programs. Size: 48 x 96 mm

RE70

 

In addition to the basic features, RE720 has relay O/P, Password Protection, Self Tuning, Innovative smart PID algorithm, Programmable by push button.

Rish Clip-ON CT's

 

RishClamp-ON CT (frequency 40Hz…1KHz)measures current without interrupting the conducting line used directly with Rish multimeters. Compliance-CAT III 600V per IEC 61010. Accuracy 1 .Used for electrically isolated measure of AC. Models:1000A/5A, 1000A/1A, & 300A/0.3A

RISHABH 6015

​

The 6015 new multimeter is made for professional use that offers safety, large range count,reliability, ruggedness, a complete tool for test automation and is equipped with more than 30 different measuring functions alongwith data logging facility & plug and play USB for connection with PC

Rishmulti 18 S

 

4 ¾ digit 31000 counts which measures Vac Vdc Vac+Vdc Aac+Adc Ohm Continuity Diode Automatic DataHold Negative Value indication, Auto/ Manual range, continuity test, Temperature measurement(PT100/PT1000), overload warning, Auto Power off. Cat II / III

RISH Clamp 1000A/300A AC/DC

​

3¾ digit 1000A AC/DC Clamp meter measures Aac/dc Vac/dc Vdc F Ohm & continuity Hz Dutycycle °C, at awkward positions of bus-bars, conductors difficult to access.180°rotating clamp jaws with 55/50mm Jaw opening Backlite display Auto/Manual mode.

Rish Max 10

 

3 ¾  3999 counts Digital Multimeter which measures Vac Vdc Adc Aac Ohm Farad Hz Temperature Continuity Diode Hold / ON Relative measurement Dutycycle measurement Auto/Manual range Buzzer/continuity test, Temperature measurement (K type) overload warning Auto-off Theft protection

Programming Cable PRKAB 600

 

The programming cable PRKAB 600 serves to connect Rishducer V604, TP-25K transducers to a PC on which PC software is installed for purposes of programming the transducer. Cable provides electrical insulation between the PC and the transducer. Transmitter prog. connector FCC-68 and ancillary cable.

Earth Testers

 

ET series are the portable Earth Testers for measurement of earth resistance and soil resistivity. The compact design allows the use in

industrial as well as household application

AET 23 Smart Digital Earth Tester

 

The Agam, AET 23 is a Smart  Digital Earth Tester capable of performing measurements of both earth resistance in ohms and also calculates AC earth voltage from 0-200V.Earth resistance testing can be performed across three ranges: 0-20 Ohms , 0-200 Ohms and 0-2000 Ohms.

bottom of page